Newport-brass 17-28 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la maison Newport-brass 17-28. Newport Brass 17-28 User Manual [en] Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 2
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
Towel Bar / Towel Ring / Robe Hook / Tissue Holder
Installation Instructions
Model No. 17-01, 17-02, 17-09, 17-12, 17-28
Recommended Installation by a Professional Contractor
1. Using the table below, measure the appropriate distance between post centers. See Figure 1.
Note: Hole locations should be level.
· 18" Single Towel Bar - 18 9/16"
· 24" Single Towel Bar - 24 9/16"
· Tissue Holder - 6 1/4"
2. Drill hole(s) in wall at points marked using the appropriate drill size:
· Wood Screw (#6 x 2”) - use: 3/32" Drill
· Toggle Screw (6-32 x 3”) - use: 3/8" Drill
3. Dis-assemble END POST (7) from POST (3). See Figure 4. Remove BONNET (6) and slide
ESCUTCHEON (5) from POST (3). See Figure 3. Fasten FLANGE (1) to finished wall using
either WOOD/TOGGLE SCREWS (2). See Figure 2.
4. Position POST (3) height to 2 3/16” from mounting surface. Secure POST (3) into place by
tightening SETSCREW (4). See Figure 2.
5. Place ESCUTCHEON (5) and thread BONNET (6) onto POST (3). See Figure 3.
6a. Towel Bars: Assemble TOWEL BAR (8) between END POSTS (6). Place END POST (7)
onto POST (3) and secure into place with SETSCREW (4). See Figure 4.
6b. Towel Ring / Robe Hook: Place towel bar assembly END POST (7) onto POST (3) and
secure into place with SETSCREW (4). See Figure 5.
6c. Tissue Holder: Place END POST (7) onto POST (3) and secure into place with
SETSCREW (4). Place HOLDER (8) between END POST (7). See Figure 6.
Fig. 2
3
1
6
3
Fig. 3
Fig. 4
Fig. 6
7
4
7
4
8
7
7
3
3
7
7
4
Fig. 5
3
3
3
3
2 3/16”
4
5
2
4
8
4
Distance between
posts
Fig. 1
Vue de la page 0
1 2

Résumé du contenu

Page 1 - Installation Instructions

Towel Bar / Towel Ring / Robe Hook / Tissue HolderInstallation Instructions Model No. 17-01, 17-02, 17-09, 17-12, 17-28Recommended Installation by a P

Page 2 - Limited Warranty

Newport Brass Product CareNewport Brass faucets and bath fittings are made of solid brass and are of the finest quality. To maintain the finish on the

Commentaires sur ces manuels

Pas de commentaire